How to reprogram a Harbor Breeze fan remote

To reprogram a Harbor Breeze fan remote, you need to get rid of the battery cover available at the back of the remote and remove the batteries. drain all the remaining power by pressing all the buttons on the remote, after that, wait for about 30 seconds before you install the batteries again.

Then, locate the power switch on your fan in order to turn it off. Turn on the power again after waiting for at least 30 seconds.

To sync the remote, you need to press and hold the “Fan Off” button and also press the “Hi,” “Med,” and “Low” buttons in the same sequence. When the LED light on the remote blinks, then release these buttons as the blinking of the light is an indication that the remote is ready to be synced.

Find the small receiver unit available on the fan’s motor housing. After doing so, press and hold the “Sync” button you will see on the receiver until the LED light starts blinking. To sync it with the fan, you need to press the “Fan Off” button quickly on the remote. The LED light on the receiver should stop blinking to let you know that syncing is successfully completed.

Lastly, test the remote functions by using its button such as controlling the fan speed as well as direction. If it is working perfectly, the fan will react as you command. If you are having issues, read the user manual to get specific instructions for your Harbor Breeze fan.